Test & Measurement [T&M/Application Notes][Page 3] - EE Times India.

Home
Login
Register now
Jun 23,2016

Global Sources

Advanced Search

Stay in touch with EE Times India

EE Times-India > T&M > More T&M Application Notes

Editor's Choice

Sniper bullet homes in on target like a guided missile

DARPA developed a specialised .50-caliber round combined with optical sighting technology that allows for real-time...

Application Notes (Sorted By Date)

Fan speed control is cool (28/06/11)
Using N5747A power supply with Medalist i3070 Series 5 (28/06/11)
Use a linear potentiometer to create a non-linear transfer function for audio volume control (27/06/11)
Evaluating battery run-down with source/measure unit, and control and analysis Software (24/06/11)
LED production test (24/06/11)

Thermistor evaluation (23/06/11)
Thermistor production test (23/06/11)
LIV test of laser diode (22/06/11)
Characterisation of bipolar transistors (22/06/11)
IV characterisation of OLEDs (21/06/11)

Tips on selecting oscilloscope (21/06/11)
Detecting harmonics in an AC signal (20/06/11)
Diode production test using Agilent B2900A Series (17/06/11)
IV characterisations of photovoltaic cells (17/06/11)
LED IV measurement using Agilent B2900A Series (16/06/11)

fT-Ic measurement using Agilent B2900A (16/06/11)
Resistance measurements using Agilent B2900A Series (15/06/11)
Revealing waveform characteristics up to a digitizer's full bandwidth (15/06/11)
Field effect transistor characterisation (14/06/11)
Diode evaluation using Agilent B2900A Series (14/06/11)

Resistor production test using Agilent B2900A Series (10/06/11)
Using SystemVue to integrate wireless PHY design (10/06/11)
PNA-X non-linear vector network analyser and X-parameters in power amp design (09/06/11)
Addressing the challenges of high-speed digital I/O for aerospace defence apps (09/06/11)
Protecting RS-485 interfaces against lethal electrical transients (08/06/11)

Specifying calibration standards and kits for vector network analysers (03/06/11)
Using hardware interface on Agilent N1231B PCI three-axis laser board with external sampling (03/06/11)
71M6513 neutral current measurement (03/06/11)
Optimising oscilloscope measurement accuracy on systems with Agilent active probes (02/06/11)
Oscilloscopes performance guide using 89600 vector signal analyser software (02/06/11)

71M6513 harmonic analysis (02/06/11)
Basic PBIST configuration and influence on current consumption in TMS570LS MCU (01/06/11)
71M6513 standards compliance test report (01/06/11)
71M6513 Broadband VARh harmonic performance (31/05/11)
TRF372017 noise analysis: Modulator noise estimation from output noise (30/05/11)

6613_OMU_2+2S_URT_v100 firmware description (30/05/11)
71M652X power meter IC: Design for EMC (24/05/11)
EMC/EMI design guidelines for 71M651x ICs (23/05/11)
Manufacturing with 73M2901CE V.22 bis single chip modem (19/05/11)
PTT testing (19/05/11)

Controlling CHOP_EN signal (13/05/11)
Implement end-of-conversion detection in ambient light sensors (12/05/11)
Interfacing to RX pin of 6511, 6513 and 6515 (12/05/11)
Infrequent temperature measurements (11/05/11)
Rogowski coil meter interface with Teridian 71M6513 (10/05/11)

Using Teridian 71M6511/71M6513's optical port (09/05/11)
71M6511 energy meter IC (06/05/11)
71M651x energy meter IC (05/05/11)
71M65XX energy meter ICs (04/05/11)
71M6511 calibration of single phase meter with shunt and CT (03/05/11)

607 records, page 3 of 13

First Page

Previous Page

1 • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 • 13

Next Page

Last Page

Hot columns

Search EE Times India

Top Ranked Articles

High-quality Articles

Go to top

Connect on Facebook

Follow us on Twitter

Follow us on Orkut

Back to Top