|
Technical Archives (Sorted By Date)
-
Exploring Automotive Audio Bus technology
(10/02/16)
- Learn about chopper op amps and noise (29/12/15)
- Significance of op amps' slew rate (28/12/15)
- How to optimise equalisation for FFE, CTLE, DFE (05/11/15)
- Rules of thumb: Intrinsic op amp noise (26/10/15)
- Signal chain basics: Grasping noise in ADCs (14/09/15)
- Unravelling the limitations of DSPism (27/04/15)
- Performing accurate current sensing in spacecraft (29/12/14)
-
Setting up knock-sensor signal-conditioning system
(18/11/14)
- Using low output noise regulator for data acquisition (21/08/14)
- Benefits of dynamic power control (26/06/14)
- I/O sync techniques for complex embedded designs (15/04/14)
- Performing sine/cosine-to-digital conversion (12/03/14)
- Is ADC in SoC essential or just a placeholder? (31/01/14)
- Developing a cell-monitoring system (12/12/13)
- Audio mixing: Headphones vs loudspeakers (20/11/13)
- Audio pitch-shifting and the Constant-Q method (19/11/13)
- Understanding data acquisition in data converters (14/11/13)
- Significance of SoCs in DAQ development (07/11/13)
- Seeking clarity on op amp and its compensation (11/09/13)
- Selecting the appropriate audio amp topology (29/05/13)
- Boost oscilloscope vertical resolution (Part 2) (06/05/13)
- Tackle issues in analogue, digital MEMS mic design (26/04/13)
- Boost oscilloscope vertical resolution (Part 1) (25/04/13)
- Developing safe, compliant medical devices (25/03/13)
- Developing high-temp differential amplifier (21/03/13)
- Signal integrity basics (Part 1) (06/02/13)
- Grasp the perfect pseudo-differential input ADCs (01/02/13)
- Audio synthesis, noise reduction in automotives (31/01/13)
- Why JESD204B suits wideband data converter apps (21/11/12)
- Broadening ADC dynamic range (05/11/12)
- Building robust HMM models for speech recognition of the hearing impaired (01/10/12)
- Developing MEMS driver ASIC for contact lens sensor (28/09/12)
- Grasping JESD204 standard for ADCs (19/09/12)
- Evaluate multi-speaker isolated word recognition using concatenated perceptual feature (17/09/12)
- The evolving standards for TV silicon tuners (30/08/12)
- Add flexibility to 32bit MCU designs using standard peripherals approach (29/08/12)
- Create sounds using analogue electronics (Part 10) (22/08/12)
- Create sounds using analogue electronics (Part 9) (13/08/12)
- Create sounds using analogue electronics (Part 8) (07/08/12)
- Create sounds using analogue electronics (Part 7) (27/07/12)
- Design low-cost, high-resolution time measurement app (06/06/12)
- Create sounds using analogue electronics (Part 6) (04/04/12)
- Spatial audio generation from portable devices (Part 2) (30/03/12)
- Create sounds using analogue electronics (Part 5) (03/02/12)
- Spatial audio generation from portable devices (Part 1) (19/01/12)
- Create sounds using analogue electronics (Part 4) (10/01/12)
- A tutorial on digital signalling (Part 3) (19/12/11)
- Create sounds using analogue electronics (Part 3) (06/12/11)
- Managing different clock frequencies of audio codecs (02/12/11)
Hot columns
Search EE Times India
Top Ranked Articles
- DC/DC converter IC optimised for single-cell battery apps
- Exploring Automotive Audio Bus technology
- ST's digital power amps promise clear audio for cars
- Driver amp operates from 24GHz to 35GHz
- Setting up knock-sensor signal-conditioning system
- Diodes amp claims to reduce component count
- High gain amplifiers aimed at military radar apps
- Pasternack unveils 1W, 2W broadband amplifiers
- Pasternack intros X band high gain power amps
- 2W PA with 40dB gain supports up to 2700MHz
All rights reserved.Reproduction in whole or in part in any form or medium without the express written permission of UBM Asia Ltd. is prohibited.