Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Networks
 
 
Networks  

IoT start-up unveils end-to-end platform for 802.15.4 network

Posted: 29 Oct 2015     Print Version  Bookmark and Share

Keywords:Helium  IoT  Machina Research  6LoWPAN  Zigbee 

The nodes should run for more than a year on two AA batteries. Chandhok rejects talk of IoT nodes that run for a decade on a button cell. "The question is what's your goal, won't your applications change in ten years," he asked.

Module supports two bands, boosts power

The Helium network is based on the 802.15.4 physical-layer chip supplied by Atmel, but Helium uses its own media-access control and software stack rather than 6LoWPAN or Zigbee. The net lets nodes dynamically switch between 900MHz and 2.4GHz frequency bands, it supports hardware-based root-of-trust security with an Atmel chip and rather than use mesh networking it pumps up radio power and sensitivity to boost distance.

The Helium net "is good about getting on and off the network quickly...others have long negotiation phases," said Chandhok, declining to give specific numbers.

The network can be configured to use only the 900MHz or 2.4GHz bands. Alternatively nodes can listen for interference and negotiate with access points about which band to use at any given time. Nodes can be moved but do not support operation while mobile.

Helium node

The Helium node includes an RF module, a sensor module and a main board.

"I don't know of anyone else switching between bands, it would be completely proprietary and therefore limit the end devices that could talk to their network," said Geoff Mulligan, chair of the LoRa Alliance that supports a rival IoT network. "I would be surprised if they get the world to accept this non-standard band hopping," he added.

Separately, Helium chose not to use mesh networking, an increasingly popular approach to expand reach and reliability of an IoT network. Instead it uses more powerful power amps on its transmitters and more sensitive low noise amps on its receivers to have a reach that spans several floors inside a building or two or three block outdoors in a city, said Chandhok, again declining to provide specifics.

"A group of us in the company have a lot of experience in Zigbee and other mesh networks and never saw the benefit in real-world apps," said Chandhok, citing the battery drain from waking up nodes to relay messages and larger software stack required for meshing. "Meshing is not bad but in general our coverage is better without it," he said.

 First Page Previous Page 1 • 2 • 3 Next Page Last Page



Comment on "IoT start-up unveils end-to-end plat..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top