Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > RF/Microwave

More-than-Moore to enable next-gen electronics

Posted: 14 Oct 2015     Print Version  Bookmark and Share

Keywords:Globalfoundries  More-than-Moore  PC  smartphone  IoT 

This year's Semicon Europa exhibition held at Dresden Germany has highlighted the trend that the era of the PC as a driver for the semiconductor industry is over. This is according to Rutger Wijburg, SVP and GM of Globalfoundries Inc., making the case for More-than-Moore semiconductors as the enabler of the next wave of electronics.

The smartphone inherited that role and is now responsible for 27 per cent of all ICs sold but even the smartphone chip market is flattening. "The new wave is the Internet of Things (IoT) but it doesn't need the most advanced technology. It needs the lowest power and the lowest cost," said Wijburg.

He then added that Globalfoundries' own take on the fully depleted silicon-on-insulator (FDSOI) manufacturing process developed by STMicroelectronics was a good fit for many of both the analogue and digital needs of IoT. "Globalfoundries has announced. By staying planar we can get near FinFET performance at the cost of 28nm planar CMOS. Also IoT needs very low power and 22FDX can operate down to 0.4V."

IoT to drive IC market

IoT is the next wave of digitisation and will be driven by yet lower power consumption and cost. ( Source: SEMI and Wijburg )

The event's first speaker was Laith Altimeme, the in-coming president of SEMI Europe, the organiser of Semicon Europa. Altimime took the position with effect from Oct. 1 and has come from Imec where he was director of business development and before that was in charge of memory development there.

Altimime said that memory manufacturing has taken the lead in fab equipment spending, at about $17 billion forecast for 2015, mainly due to the transition to 3D manufacturing of NAND flash memory. Spending on equipment for foundry is in second place at about $12.5 billion in 2015 and logic and processor fabs down at $5.5 billion. The others category is down at $2.5 to $3 billion. These figures are for all front-end equipment including new, used and in-house. The total spend is estimated to be $38.44 billion in 2015 up by three per cent on 2014.

Comment on "More-than-Moore to enable next-gen e..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top