Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Sensors/MEMS

ON Semi develops 1/3in 1MP image sensor for ADAS

Posted: 14 Jul 2015     Print Version  Bookmark and Share

Keywords:ON Semiconductor  ADAS  image sensor  CMOS  BSI 

ON Semiconductor has announced the early sampling of its first backside illuminated (BSI) sensor technology for the automotive imaging market, as it expands its 1/3in 1MP image sensor line-up.

The innovative sensor technology claims to deliver 4x better low light signal-to-noise ratio, a 40 per cent increase in visible light sensitivity, and greater than 60 per cent improvement in near infrared (NIR) performance than its previous offering for advanced driver assistance systems (ADAS), said the company.


The AR0136AT 1/3in optical format CMOS digital image sensor delivers a 1280x960 resolution from 3.75µm BSI pixels. The chip supports linear and high dynamic range (HDR) modes, in a single chip HDR solution, with a 120dB dynamic range in HDR mode.

It has an output pixel rate of 74.25MP/s (maximum), which results in a frame rate of 45fps at 960p resolution and 60fps at 720p resolution. It has an operating junction temperature range of -40°C to 125°C and will be fully qualified to AEC-Q100. Engineering samples will be available in 3Q15, with mass production planned for early 2016.

- Julien Happich
  EE Times Europe

Comment on "ON Semi develops 1/3in 1MP image sen..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top