Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Guide to field-oriented control: Step 3

Posted: 06 Apr 2015     Print Version  Bookmark and Share

Keywords:Field-oriented control  FOC  DC motors  torque  rotor 

In Part 1 and Part 2, we discussed measuring motor current as well as the most critical piece in the field-oriented control (FOC) process, comparing the measured current to desired values and generating error signals. Now that we have two error signals based on a rotating reference frame (figure 1), we need to complete our four-step process. What do we do with the signals? More importantly, how do we translate our signals back down to the stationary reference frame? We will answer these questions by proceeding to the final steps of FOC.

 

 

Figure 1: Comparing measured DC currents to their desired values.

Amplify the error signals to create correction voltages. If you've made it this far, you can relax a bit; these last two steps are super easy. Just like with brush DC motor torque control, we turn to our old friend the P-I controller to take the current error signals and amplify them to create the motor voltages. The only difference with this step compared to a brush DC motor is that we now have two P-I controllers: one for the d-axis and one for the q-axis. And since they exist on a rotating reference frame synchronous to the rotor flux axis, both d and q currents are DC VALUES when the motor is operating under steady-state conditions, regardless of speed! Figure 2 shows the two P-I controllers along with recommended tuning coefficient values.

Figure 2: Synchronous frame P-I controllers with tuning values.

In the final instalment, we will tackle the last step in the field-oriented control (FOC) process.

About the author
Dave Wilson is Senior Industrial Systems Engineer for C2000 Microcontrollers at Texas Instruments.





Comment on "Guide to field-oriented control: Ste..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top