Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Doping germanium quantum dots to yield solar cells

Posted: 19 Feb 2015     Print Version  Bookmark and Share

Keywords:Natcore Technology  solar cell  germanium  quantum dot  silica 

A team of researchers working with Natcore Technology Inc. in the Rice University laboratories of Andrew Barron, a Natcore co-founder, has created a heterojunction solar cell using germanium quantum dots on an ordinary n-type silicon wafer. They were able to do this by coating individual germanium quantum dots with silicon dioxide (silica), doped to make them p-type, and then deposited, using Natcore's liquid phase deposition (LPD) process, on a commercial-grade silicon wafer.

"Very simply put, we used our proprietary process to 'dope' silica-coated germanium quantum dots and arrange them in a silica film atop a commercial silicon wafer. We then put contacts on the coated wafer to create a cell, and exposed it to light. We obtained a net power out of the device," said Dennis Flood, Natcore's CTO and company co-founder.

Quantum-dot solar cells have the potential to be transformational for terrestrial solar energy, with efficiencies far above anything available commercially today.

The advantage lies in the fact that by carefully controlling the size of the quantum dots, the cell can be "tuned" to capture energy from a specific spectrum of light. The portion of the spectrum not captured passes to the next layer below, where it can then be captured by either a specifically tuned lower quantum-dot cell or even an ordinary silicon cell.

Thus, using "multijunction" or "tandem" cells with two or more layers of quantum-dot cells, much more of the solar spectrum can be converted to energy. In contrast, current single junction solar cells are most efficient for only a limited portion of the solar spectrum.

"To our knowledge, no one else has been able to successfully dope and arrange silicon or germanium quantum dots into layers using a process such as Natcore's, which appears to be ideal for mass production," stated Flood.

Tandem solar cells are a proven technology in space applications. The major issue preventing their broad use in earth-based applications has been the need to use exotic semiconducting materials for the upper layers.

The cell created in Barron's laboratory for Natcore uses relatively abundant and inexpensive germanium, with the coated quantum dot having been characterised as a "p-type" material.

This heterojunction cell, with p-type quantum dots on an n-type silicon wafer, is an important step toward a cell in which quantum dots are used to form both the p-type and n-type materials. Once this next step is achieved, it will open the door to potential ultra-high-efficiency, multi-junction solar cells.

"This is a truly exciting time for Natcore and our shareholders," said Chuck Provini, Natcore's president and CEO. "We are one step away, n-type quantum dots, from our ultimate goal in our quantum dot solar cell programme."

The LPD process was developed at Rice and is licensed exclusively to Natcore.





Comment on "Doping germanium quantum dots to yie..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top