Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Power/Alternative Energy
Power/Alternative Energy  

Laser-induced graphene shows promise for wearables

Posted: 21 Jan 2015     Print Version  Bookmark and Share

Keywords:Rice University  graphene  wearable  supercapacitor 

A team of researchers at Rice University has made headway in the development of laser-induced graphene (LIG) by creating and testing stacked, 3D supercapacitors aimed at portable, flexible devices. According to one of the scientists, the flexible stacks demonstrate excellent energy-storage capacity and power potential and can be scaled up for commercial applications.

James Tour of Rice University discovered in 2014 that firing a laser at an inexpensive polymer burned off other elements and left a film of porous graphene. The researchers viewed the porous, conductive material as a perfect electrode for supercapacitors or electronic circuits.

The scientists have extended their work to make vertically aligned supercapacitors with laser-induced graphene on both sides of a polymer sheet. The sections are then stacked with solid electrolytes in between for a multilayer sandwich with multiple microsupercapacitors. LIG can be made in air at ambient temperature, perhaps in industrial quantities through roll-to-roll processes.

Capacitors use an electrostatic charge to store energy they can release quickly, such as in a camera flash. Unlike chemical-based rechargeable batteries, capacitors charge fast and release all their energy at once when triggered. But chemical batteries hold far more energy. Supercapacitors combine useful qualities of both the fast charge/discharge of capacitors and high-energy capacity of batteries into one package.

LIG supercapacitors appear able to offer the fast charge/discharge of capacitors and high-energy capacity of batteries in a single package while having the added benefits of flexibility and scalability. The flexibility ensures they can easily conform to varied packages they can be rolled within a cylinder, for instance without giving up any of the devices performance.

Microsupercapacitors with laser-induced graphene

The schematic shows the process developed by Rice University scientists to make vertical microsupercapacitors with laser-induced graphene. The flexible devices show potential for wearable and next-generation electronics. Image courtesy of the Tour Group

"What we've made are comparable to microsupercapacitors being commercialised now, but our ability to put devices into a 3D configuration allows us to pack a lot of them into a very small area," Tour said. "We simply stack them up."

"The other key is that were doing this very simply. Nothing about the process requires a clean room. It's done on a commercial laser system, as found in routine machine shops, in the open air."

Ripples, wrinkles and sub-10nm pores in the surface and atomic-level imperfections give LIG its ability to store a lot of energy. But the graphene retains its ability to move electrons quickly and gives it the quick charge-and-release characteristics of a supercapacitor. In testing, the researchers charged and discharged the devices for thousands of cycles with almost no loss of capacitance.

To show how well their supercapacitors scale up for applications, the researchers wired pairs of each variety of device in serial and parallel. As expected, they found the serial devices delivered double the working voltage, while the parallels doubled the discharge time at the same current density.

The vertical supercapacitors showed almost no change in electrical performance when flexed, even after 8,000 bending cycles.

Tour pointed out that while thin-film lithium ion batteries are able to store more energy, LIG supercapacitors of the same size offer three times the performance in power (the speed at which energy flows). And the LIG devices can easily scale up for increased capacity.

"We've demonstrated that these are going to be excellent components of the flexible electronics that will soon be embedded in clothing and consumer goods," Tour indicated.

- Paul Buckley
  EE Times Europe

Comment on "Laser-induced graphene shows promise..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top