Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Memory/Storage
 
 
Memory/Storage  

U-Boot debugging with CodeWarrior

Posted: 26 May 2014     Print Version  Bookmark and Share

Keywords:U-Boot  debugging  CodeWarrior  IDE  NOR 

This document describes the steps required for U-Boot debugging using the CodeWarrior IDE.

This document includes the following sections:

 • Configuring and building U-Boot.
 • Creating a CodeWarrior project to debug U-boot.
 • Specifying the launch configuration settings.
 • Debugging U-Boot from NOR, NAND, SPI, and SD card flash devices for low-end and high-end Power Architecture CPU.
U-Boot resides in flash memory on target systems and boots an embedded Linux image or other OS image (vxworks) or an elf, developed for those systems.

View the PDF document for more information.

Originally published by Freescale Semiconductor at www.freescale.com as "CodeWarrior U-Boot Debugging".





Comment on "U-Boot debugging with CodeWarrior"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top