U-Boot debugging with CodeWarrior

This document includes the following sections:

 • Configuring and building U-Boot.
 • Creating a CodeWarrior project to debug U-boot.
 • Specifying the launch configuration settings.
 • Debugging U-Boot from NOR, NAND, SPI, and SD card flash devices for low-end and high-end Power Architecture CPU.
U-Boot resides in flash memory on target systems and boots an embedded Linux image or other OS image (vxworks) or an elf, developed for those systems.

View the PDF document for more information.

Originally published by Freescale Semiconductor at www.freescale.com as "CodeWarrior U-Boot Debugging".