Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Independent rail dual buck converter with TPS51220

Posted: 24 Feb 2014     Print Version  Bookmark and Share

Keywords:TPS51220  buck regulator  LDOs  power supply 

The TPS51220 device is a dual-synchronous buck regulator controller with two LDOs. It is optimised for a 5-V or 3.3-V system controller, enabling designers to cost effectively complete a power supply for a 2-cell to 4-cell notebook system. The TPS51220 is touted to support high-efficiency, fast-transient response and 99% duty cycle operation. It supports supply input voltage ranging from 4.5 to 28 V, and output voltages from 1 to 12 V.

This application report shows the design and test of a simple circuit to achieve rail independence in TPS51220, which otherwise cannot be used in independent supplies. The same arrangement can be extended to any supply to ensure supply-rail stability before the device is enabled.

View the PDF document for more information.

Originally published by Texas Instruments at www.ti.com as "Independent Rail Dual Buck Converter Using TPS51220".





Comment on "Independent rail dual buck converter..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top