Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > T&M
 
 
T&M  

Agilent intros M8000 series of BER test solutions

Posted: 24 Jan 2014     Print Version  Bookmark and Share

Keywords:Agilent  Bit Error Ratio  mobile computing  data centre 

Agilent Technologies has introduced a Bit Error Ratio (BER) test solution for developers and system integrators of multi-gigabit network equipment. The M8000 enables developers to characterise and validate Physical Layer designs and to perform compliance testing in this segment.

Supporting a wide range of data rates and standards, the instrument helps accelerating insight into the performance margins of high-speed digital devices for computer, consumer, server, mobile computing and data centre products.

When R&D and validation teams characterise next-generation designs, they face multiple test challenges. First, the faster data rates of the emerging next-generation digital computer buses, such as PCI Express 4 (with a bit rate of 16 GT/s) and USB 3.1 (with a bit rate of 10 Gb/s), present new signal integrity test challenges. New 128/130bit and 128/132bit coding formats complicate error detection and loopback pattern creation.

In addition, widespread adoption of mobile computing devices means more and more R&D and test engineers need to test different implementations of MIPI ports, with new data formats, termination models, multiple lanes and built-in error counting.

Lastly, with the enormous surge in data-centre traffic, servers and storage designs must support much higher bandwidths on their backplane and networking ports. Data rates of 25 Gb/s and more on multiple lanes over PC boards, cable or optical interconnects are required by most industry standards, such as 100GbE, CEI and Fibre Channel. Testing such 25-Gb/s receiver ports requires new test capabilities to characterise device tolerance for interference, channel losses and crosstalk. The M8000 Series instruments enable R&D and test engineers to master these challenges, said Agilent.

The first model in the new M8000 Series is the J-BERT M8020A that offers built-in jitter injection, 8-tap de-emphasis, interference sources, reference clock multiplication, clock recovery and equalisation. "It enables fast and accurate receiver characterisation of single- and multi-lane devices operating at data rates up to 16 Gb/s and 32 Gb/s."

The J-BERT M8020A BERT supports one to four BERT channels and offers data rates of up to 8.5 Gb/s and 16 Gb/s with an extension to 32 Gb/s. It is based on AXIe standard. The M8020A is controlled from a user interface via USB. All options are upgradeable.





Comment on "Agilent intros M8000 series of BER t..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top