Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > T&M

Calibrating an energy measurement processor

Posted: 22 Oct 2013     Print Version  Bookmark and Share

Keywords:78M6610  PSU  energy measurement processor  power-supply units  calibrate 

The 78M6610+PSU is an energy measurement processor that is embedded in high-power switch-mode power-supply units (PSUs) to measure and report the real-time power used by the system. As with any measurement device, the sense circuit used with the 78M6610+PSU must be calibrated before its measurements can be accepted as accurate. This application note demonstrates how to calibrate a measurement sub-system using the 78M6610+PSU.

View the PDF document for more information.

Originally published by Maxim Integrated Products as "In-System Calibration with the 78M6610+PSU Energy Measurement Processor".

Comment on "Calibrating an energy measurement pr..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top