Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Memory/Storage

65% of NAND ICs to use 3D process by 2017

Posted: 08 Oct 2013     Print Version  Bookmark and Share

Keywords:IHS  NAND market  3D technology  Samsung  SK Hynix 

IHS has recently reported that by 2017, nearly two-thirds—or 65.2 per cent—of all NAND memory chips shipped worldwide will be produced using 3D manufacturing processes, up from less than one per cent this year. The share of the overall NAND market accounted for by 3D technology is forecast to jump to 5.2 per cent in 2014, and then surge to 30.2 per cent of total flash memory shipments in 2015. In 2016, 3D NAND will enlarge its market share to 49.8 per cent—representing about half of the entire flash memory market, added the market research company.

"There's widespread agreement that just one or two generations may be left before NAND flash made using conventional planar semiconductor technology reaches its theoretical limit," said Dee Robinson, senior analyst, memory and storage for IHS. "As lithographies shrink further, performance and reliability may become too degraded for NAND to be used in anything but the very lowest-cost consumer products. Because NAND suppliers are compelled to continue building products with higher densities and lower prices, they will migrate to 3D manufacturing quickly in the coming years."

A major factor driving NAND makers to keep improving their products is demand from products such as media tablets and smartphones. These devices are demanding higher capacity and less expensive storage of content, including pictures, music and video.

Historically, NAND flash makers have employed miniaturisation to increase the capacity and reduce the costs of their products. Miniaturisation is the process of shrinking the NAND flash cells with each successive technology generation, allowing suppliers to fit more bits on each silicon wafer.

With 3D technology, the emphasis shifts away from miniaturisation and towards increasing density by layering NAND flash cells on top of each other. This will be the most cost-effective way of pushing NAND to the next level because most of the existing manufacturing equipment can continue to be used, minimising expenses while maximising return on investment.

Samsung and SK Hynix, the biggest players in the global memory trade, announced their initiatives in 3D NAND in August during the Flash Memory Summit in Santa Clara, Calif.

Samsung said commercial production of V-NAND, the company's name for its 3D flash memory products, started during Q2. The end product will be a V-NAND-based solid-state drive, in 480GB and 960GB densities, initially targeting the enterprise market. V-NAND, Samsung said, will be more reliable than 1x-nm NAND, consume less power and also deliver higher performance in sequential as well as random writes.

The cost differential between a V-NAND solid-state drive and one powered by traditional flash memory will be quite large, IHS added, which would explain why Samsung is aiming the product first at the enterprise market.

Samsung archrival SK Hynix is also planning to manufacture 3D NAND. Its initial 3D product will be very similar to Samsung's V-NAND, to be available in 128GB capacity. But this is part of a two-pronged approach, as the company is also sampling a 16nm product.

While both Samsung and SK Hynix have previously mentioned internal development of 3D NAND, the timeline for production has moved faster than expected, and the accelerated pace is much quicker than many in the industry had anticipated.

Other memory manufacturers, however, have decided to continue with planar NAND for at least one more generation, pushing any 3D plans to a later date. In this group are makers such as SanDisk of California, Idaho-based Micron Technology and Toshiba of Japan.

All told, initial production of 3D NAND will be limited, and failure analysis will be difficult because of the multi-level structure of the device. Still, an initial ramp-up of higher-performing products into the enterprise segment will enable suppliers to generate margins and allow processes to mature, IHS believes, even though it may be some time before 3D contributes meaningfully to overall industry bit growth.

At any rate, the 3D race for NAND has begun, solidifying the timeline for the new technology. NAND suppliers that have yet to address the change are likely to feel pressure to innovate as a result.

For more statistics and forecasts, click here.

Comment on "65% of NAND ICs to use 3D process by..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top