Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Power/Alternative Energy
Power/Alternative Energy  

Power ICs tout MIPI RFFE digital control interface

Posted: 29 Aug 2013     Print Version  Bookmark and Share

Keywords:Texas Instruments  MIPI RFFE  LM3263  LM3263  buck converter 

Texas Instruments (TI) has rolled out what it boasts as the industry's first RF power converters to integrate the MIPI Alliance's radio frequency front-end (RFFE) digital control interface, a specification that simplifies multi-band and multi-radio communications. According to the company, the LM3263 buck converter and LM3279 buck-boost converter cut the heat and power consumption in RF power amplifiers, improving battery life and extending talk time in 2G, 3G and 4G LTE smartphones, tablets and data cards.

The LM3263 2.5A buck converter's average power tracking feature helps it meet stringent RF requirements of multi-mode, multi-band power amplifiers with fast output voltage transients. The device also includes active current assist and bypass to minimise inductor size without loss of output regulation, resulting in a 10mm2 solution, which is half the size of competing solutions. The LM3279 1A buck-boost regulator supports fast output voltage transients for 3G and 4G LTE. The device enables the amplifier to support high output power and high data rates, even at low battery voltages.

The MIPI RFFE digital control interface provides compatibility with next-generation RF front end chipsets, power amplifiers and reference platforms. Additionally, the 2.5A LM3263 meets voltage and current requirements of 2G, 3G and 4G, and the LM3279 supports 1A loads for 3G and 4G. The 2.7MHz LM3263 buck converter results in a 10mm2 total solution size and the LM3279 is a 13mm2 solution.

TI also introduced the LM8335 general output expander with MIPI RFFE host interface to complement the LM3263 and LM3279. The expander reduces the general-purpose input/output pin allocation and gives designers greater design flexibility to support up to eight additional analogue outputs that use analogue-controlled, non-MIPI RFFE compliant components.

Designers can test power and performance with the LM3263, LM3279 and LM8335 evaluation modules for 3G and 4G RF power amplifiers. The modules include all essential active and passive components to compare analogue and RFFE digital control modes of operation.

The LM3263 comes in a 2 x 2 x 0.6mm, 16-bump lead-free DSBGA package, and is priced at $0.48 in 1,000-unit quantities. The LM3279 buck-boost converter also comes in a 2 x 2.5 x 0.6mm, 16-bump lead-free DSBGA package, and is priced at $0.75 in 1,000-unit quantities. The LM8335 comes in a 2 x 2 x 0.6mm, 16-bump lead-free DSBGA package, and is priced at $0.68 in 1,000-unit quantities.

Comment on "Power ICs tout MIPI RFFE digital con..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top