Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Embedded
 
 
Embedded  

New semiconductor based on 2D nanocrystals

Posted: 17 Apr 2013     Print Version  Bookmark and Share

Keywords:semiconductor  nanocrystals  transistors  molybdenum disulfide  CMOS 

Researchers at Purdue University are developing a new type of semiconductor technology for future computers and electronics based on "two-dimensional nanocrystals."

The material is layered in sheets less than a nanometer thick that could replace today's silicon transistors, according to the researchers.

The layered structure is made of a material called molybdenum disulfide, which belongs to a new class of semiconductors -- metal di-chalogenides -- emerging as "potential candidates to replace today's technology, complementary metal oxide semiconductors, or CMOS."

"We are going to reach the fundamental limits of silicon-based CMOS technology very soon, and that means novel materials must be found in order to continue scaling," said Saptarshi Das, who has completed a doctoral degree, working with Joerg Appenzeller, a professor of electrical and computer engineering and scientific director of nanoelectronics at Purdue's Birck Nanotechnology Center.

"I don't think silicon can be replaced by a single material, but probably different materials will co-exist in a hybrid technology."

The nanocrystals are called two-dimensional because the materials can exist in the form of extremely thin sheets with a thickness of 0.7 nanometers, or roughly the width of three or four atoms. Findings show that the material performs best when formed into sheets of about 15 layers with a total thickness of 8-12 nanometers.

The researchers also have developed a model to explain these experimental observations. "Our model is generic and, therefore, is believed to be applicable to any two-dimensional layered system."

Molybdenum disulfide is promising in part because it possesses a bandgap, a trait that is needed to switch on and off, which is critical for digital transistors to store information in binary code. Analysing the material or integrating it into a circuit requires a metal contact. However, one factor limiting the ability to measure the electrical properties of a semiconductor is the electrical resistance in the contact. The researchers eliminated this contact resistance using a metal called scandium.

Transistors contain critical components called gates, which enable the devices to switch on and off and to direct the flow of electrical current. In today's chips, the length of these gates is about 14 nanometers, or billionths of a meter.

The semiconductor industry plans to reduce the gate length to 6 nanometers by 2020. "However, further size reductions and boosts in speed are likely not possible using silicon, meaning new designs and materials will be needed to continue progress," said the researchers.





Comment on "New semiconductor based on 2D nanocr..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top