Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Embedded
 
 
Embedded  

Mellanox to open-source Ethernet switch software

Posted: 06 Mar 2013     Print Version  Bookmark and Share

Keywords:open source  Ethernet switch  software 

Mellanox Technologies launched the "Generation of Open Ethernet" initiative, pledging that it will open source software for its Ethernet switches over the next several months.

The chip and system provider hopes to gain an edge over larger competitors that are only partially embracing a trend to open software for Ethernet.

Mellanox dominates Infinband networking which has a tradition of mainly open source code but a relatively small market. It faces entrenched giants in larger Ethernet markets, many of them now resisting a push towards open source software.

As a starting point, Mellanox is supporting the so-called Quagga open source Layer 3 routing code on its Ethernet switches. Mellanox plans to release open source versions of its Layer 2 switching code and management software for its products in the next few months. It also aims to strike open source partnerships.

Mellanox expects to make its code available on broad licensing terms that don't require users to post back any changes. It will not, however, make available as open source the firmware or some of the driver code for its chips.

"Firmware is part of the hardware and typically proprietary—it's connected to the hardware, so there's no reason to open it," said Gilad Shainer, vice president of market development at Mellanox. "Part of the driver [code may be made] open, and part of it will remain closed because [it also is] dedicated to the hardware, so there is no reason to open it," he said.

Mellanox is currently supporting an early version of OpenFlow, a protocol that lets software on servers control and manage network functions on switches and routers. The company also is working to support OpenFlow controllers from third parties including Floodlight, he said.

In recent announcements, large Ethernet switch makers such as Cisco Systems and Ericsson took hybrid approaches, supporting both OpenFlow as well as their own protocols. The proprietary software will be better suited to access features in their underlying chips, they said.

- Rick Merritt
  EE Times





Comment on "Mellanox to open-source Ethernet swi..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top