Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Power/Alternative Energy
Power/Alternative Energy  

Cheap solar cells developed by spray coating

Posted: 26 Feb 2013     Print Version  Bookmark and Share

Keywords:spray-coating  photovoltaic  solar cell 

Researchers from the University of Sheffield's Department of Physics and Astronomy and the University of Cambridge claim a cheaper method to mass produce solar cells by a method of spray-coating a photovoltaic active layer by an air based process—similar to spraying regular paint from a can.

The method could potentially reduce the cost of solar cells significantly enabling the technology to be provided to people in developing countries and perhaps one day be used on glass in buildings or car roofs, say the researchers.

Professor David Lidzey from the University of Sheffield said "Spray coating is currently used to apply paint to cars and in graphic printing. We have shown that it can also be used to make solar cells using specially designed plastic semiconductors. We found that the performance of our spray coated solar cells is the same as cells made with more traditional research methods, but which are impossible to scale in manufacturing. We now do most of our research using spray coating. The goal is to reduce the amount of energy and money required to make a solar cell. This means that we need solar cell materials that have low embodied energy, but we also need manufacturing processes that are efficient, reliable and consume less energy."

While most solar cells are manufactured using special energy intensive tools and materials like silicon that themselves contain large amounts of embodied energy, plastic, by comparison, requires much less energy to make. By spray-coating a plastic layer in air the team hope the overall energy used to make a solar cell can be significantly reduced. At present devices are coated onto flat surfaces; however curved surfaces could also be coated, though the surfaces need to be very smooth.

A downside to using the plastic as solar cell materials is that they are not currently as efficient at generating electricity as cells made from silicon. The vast majority of solar panels found in the UK are made from silicon and are expected to last over 25 years. It is unlikely that plastic cells will ever be this stable, but if the energy cost of plastic cells can be lowered enough they will become more effective than silicon over their life cycle.

Professor Lidzey added: "Increasing the energy conversion efficiency and lifetime of plastic cells are significant issues that many groups are working on. It should also be noted that the cost of silicon solar panels have reduced significantly over the last few years so plastic solar cells will have to catch up with these improvements."

Spray coating

An artist's impression of spray-coating glass with the polymer to create a solar cell: Source—University of Sheffield.

Comment on "Cheap solar cells developed by spray..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top