Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Memory/Storage
 
 
Memory/Storage  

Grasp DDR SDRAM timing parameters

Posted: 03 Jan 2013     Print Version  Bookmark and Share

Keywords:DDR SDRAM  DRAM  timing parameters 

The engineers who have dealt with DDR SDRAM must have been intrigued by the various timing parameters of the DRAM. This article explains the various timing parameters and their impact on the performance of the DRAM.

To begin with, let's first understand how different DDRs are rated or classified. If we want to buy a DDR module from market, we have to consider many parameters like size, speed, timing specs, brand etc. So, we have many options to choose from. To have a better understanding of these ratings, let's see how these are presented to the buyers. Below is the picture of a DDR SDRAM module (figure 1).

Figure 1: A DDR SDRAM module.

As seen in figure 1, the module reads DDR3-1600MHz, PC3-12800. So, what does this mean? In DDRx-yyyy, "x" represents the technology generation (example: DDR2, DDR3, DDR) and "yyyy" represents the DDR clock rate or more appropriately the data rate. DDR (double data rate), as the name suggests, transfers two chunks of data per clock cycle and hence achieve twice the performance as compared to the memory without this feature. It is for this reason that DDR are rated with twice the clock rate at which they function, i.e., the data rate.

Usually, DDRx-yyyy convention is followed for the memory chips. But memory chips are not available as such. They are soldered onto tiny PCBs and are termed as memory modules, the speed of which is described as PCx-zzzz. In PCx-zzzz, "x" represents the same technology generation and "zzzz" is the maximum bandwidth, i.e., maximum transfer rate in MB/s.

Maximum Transfer Rate = clock x number of bits / 8

Since memory modules transfer 64 bits at a time, the "number of bits" will be 64.

Therefore, the formula can be simplified as:

Maximum Theoretical Transfer Rate = clock x 8

Also, one can see the operating voltage and the size of the module mentioned on the memory module. In figure 2, one can easily distinguish between the memory chips and the memory module. The tiny black entities embedded onto the green colour PCB are the memory chips, and the complete integrated circuit is the memory module.

Figure 2: One can easily distinguish between the memory chips and the memory module.

So, figure 1 throws out the following information. The memory module consists of memory chips which work at real clock of 800MHzi.e., its data rate is 1600MHz and supports a maximum possible data transfer rate of 12800 MB/s between the controller and the module. It has a capacity of 8 Gb.

Now coming to the timing parameters, we notice 9-9-9-25 and 9-9-9-24 mentioned on the memory module in figure 1 and figure 3, respectively.

So, what exactly does the timing A-B-C-D (or sometimes CLA-B-C-D) mean? It's intriguing how sometimes two memory modules with same maximum transfer rate, running at same clock frequency achieve different performances. It is because of different timing parameters. The memory timings are given through a series of numbers; as in figure 3, 9-9-9-24.

Figure 3: The memory timings are given through a series of numbers; as in this figure, 9-9-9-24.


1 • 2 Next Page Last Page



Comment on "Grasp DDR SDRAM timing parameters"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top