Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Boost efficiency of photovoltaic systems

Posted: 07 Dec 2012     Print Version  Bookmark and Share

Keywords:Photovoltaic  inverter system  customisable system-on-chip  FPGA 

There are also important considerations related to power levels. Micro inverters are typically integrated in the PV module for power levels up to 400 watts (W), whereas string inverters are used for power levels up to 10 killowatts (Kw). For power levels between 5 and 50 kW, multi-string inverters are generally the best choice. For higher power levels, central inverters should be used.

Optimising efficiency
Solar energy harvesting demands that systems achieve extremely high levels of efficiency. There are two key factors that have the biggest influence on conversion circuit efficiency. The first is topology, and the second is the type of components – including semiconductor switching devices, magnetic elements and capacitors, to name a few—and their operational characteristics.

Among the various inverter topologies that have been implemented, two have achieved higher efficiencies for grid-connected centralized inverters than alternatives. The first topology is called the Highly Efficient and Reliable Inverter Concept (HERIC). The HERIC topology uses an extra switch and diode pairs at the output, which reduces losses by decoupling the output inductor from the input capacitor. The second, more complex, topology is the multi-level inverter (figure 2). Multilevel inverters feature half the voltage stress in each switch as compared to a HERIC topology. The multi-level inverter approach uses much lower voltage, which yields higher efficiency and lower device costs. An additional benefit of multi-level inverters is that the size of the electromagnetic interference (EMI) level and output filter (for cleaning the harmonics) can be reduced, which reduces overall system cost.

Figure 2: Three-level central inverter.

Once the topology is chosen, designers must select the components that will be used. In addition to an inverter, a PV system can also have a DC-to-DC conversion stage for maintaining a constant and controlled input voltage level at the inverter, and decoupling the control of voltage and power. A drawback of using a DC-to-DC conversion stage is that it can negatively impact system efficiency. To mitigate this potential hit on efficiency, designers can employ a number of techniques. One is to use silicon carbide (SiC) power transistors, which offer several advantages over traditional silicon or even gallium arsenide (GaAs) solutions, allowing for much greater power handling and higher switching rates. A number of projects are in the works to develop utility-grade devices with an eye towards creating solid-state power transformers and high-power inverters for wind and solar farms.

A second way to improve PV system efficiency is to use maximum power point tracking (MPPT) algorithms, which enables the PV system to better control the power inverter as it reacts to changes in operating conditions. A number of MPPT algorithms are available, each with advantages and disadvantages. These algorithms regulate the PV output for maximum power delivery, ensuring that the system maintains the optimum operating point. These algorithms also ensure that the inverter draws no more than the maximum PV array output power, thus preventing inverter collapse. There are two ways to deploy an MPPT algorithm – either in the main controller, or in the individual PV modules. The latter approach allows each to track independently, which is preferred in cases where the operating conditions for individual PV modules differ significantly. This finer control over power conversion can greatly enhance the efficiency of the conversion process in applications using a larger number of modules.

A third approach for improving efficiency is to employ pulse width modulation (PWM) technology to control power switching components in the inverter circuit during DC-to-AC conversion. A PWM algorithm is used to control the switching component's states. This ensures that the time-average value of the voltage command is met. PWM algorithms can reduce losses in the inverter while optimising the voltage utilisation of the DC bus. They also offer the benefit of being well understood, and they can easily be implemented in either hardware or software.

 First Page Previous Page 1 • 2 • 3 Next Page Last Page



Comment on "Boost efficiency of photovoltaic sys..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top