Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

FinFETs-on-SOI claim to double battery life

Posted: 31 Jul 2012     Print Version  Bookmark and Share

Keywords:FinFET  SOI  bulk silicon 

TCAD simulations performed by Gold Standard Simulations Ltd (Glasgow, Scotland) revealed that fully depleted FinFET style transistors made on SOI wafers fared better in terms of leakage current—allowing only between half and one-third the leakage current of FinFETs made on bulk silicon.

Prof. Asen Asenov, CEO of GSS, has written a series of blogs on the company's website discussing simulations of FinFETs that use the company's simulation tools. A starting point was shape of Intel's FinFETs in a 22nm bulk silicon process. The simulations are performed using the company's Garand statistical 3-D TCAD simulator. He came to the conclusion that Intel may find it necessary to move to FinFET-on-SOI to shrink its process below 22nm and that foundries yet to introduce FinFET processes would be advised to pay attention.

In May GSS performed simulation making use of newly acquired information that what Intel calls tri-gate transistors, are in fact trapezoidal, almost triangular, rather than rectangular in cross-section. In June GSS pointed out that rectangular FinFET structures have superior performance and that by opting for slope-sided fins Intel is missing out on some performance. Prof. Asenov suggested that adopting FinFET on SOI wafers might make for the easier production of rectangular fins of a pre-determined and non-varying height.

In his latest blog Prof. Asenov has conducted a series of simulations that compare rectangular finFETs of different gate lengths and widths on bulk and SOI. The FinFETs are all roughly compatible with a 20nm channel length process node. The conclusion is that FinFET-on-SOI is marginally better than FinFET-on-bulk in terms of drive current but a lot better in terms of leakage current.

Figure 1 shows that the SOI FinFETs deliver on average 5 per cent higher drive current than bulk FinFETs. The SOI advantage tends to diminish with fin width and gate length.

 Comparison of overdrive current boost

Figure 1: Comparison of overdrive current boost for SOI compared to bulk. Overdrive voltage is the difference between threshold voltage and the supply voltage. Source: GSS.

Figure 2 shows that SOI FinFETs deliver between half and 30 per cent of the leakage current of the same dimensioned FinFETs on bulk silicon. This could more than double battery life in mobile phones, Prof. Asenov points out. Here the advantage of SOI FinFET decreases with decreasing gate length but increases and as fin width reduces.

 Comparison of leakage current

Figure 2: Comparison of leakage current between SOI and bulk FinFETs at the same on current. Source: GSS.

Prof. Asenov pointed out that Intel's triangular FinFETs are themselves some way behind the performance of these idealized rectangular cross-section FinFETs. It is thought that Intel has adopted the triangular cross section because it simplifies process steps for laying down and etching high-k gate insulator materials.

Researchers from GSS and the University of Glasgow published a paper at the International Electron Devices Meeting of 2011 that dealt with FinFETs implemented in SOI wafers and how they could meet the low statistical variability requirements of 11nm CMOS. Prof. Asenov said that GSS has been working with IBM.

- Peter Clarke
  EE Times





Comment on "FinFETs-on-SOI claim to double batte..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top