Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Embedded
 
 
Embedded  

How to set SRAM interface for bus state controller

Posted: 02 Aug 2012     Print Version  Bookmark and Share

Keywords:SRAM  bus state controller  MCUs 

Here's an application note that describes an example to access an SRAM. The operation is achieved by using the function of the SRAM interface with byte selection equipped in the SH7231 bus state controller.

When using this application note with other Renesas MCUs, careful evaluation is recommended after making modifications to comply with the alternate MCU.

Get SRAM accessed using the SRAM interface function with byte selection pin on the bus state controller. The SRAM of 2M bytes (1 Mwords x 16 bits) connects to the bus state controller in the bus width of 16 bits.

View the PDF document for more information.

Originally published by Renesas Electronics at www.renesas.com as "Setting the SRAM Interface for Bus State Controller".





Comment on "How to set SRAM interface for bus st..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top