Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Interface
 
 
Interface  

Communicate with EEPROM using RIIC

Posted: 21 Mar 2012     Print Version  Bookmark and Share

Keywords:EEPROM  12C  bus interface 

This document by Renesas Electronics presents a sample program that communicates with an EEPROM (in single master mode) using the Renesas MCU I2C bus interface module.

RX62T Group are the target devices in this application note. Other members of the RX Family that have the same I/O registers (peripheral unit control registers) as the RX62T Group products can also use the code from this application note. Note, however, that since certain aspects of the functions used may be changed in other devices due to function additions or other differences, the documentation for the device used must be checked carefully before using this code. When using this code in an end product or other application, its operation must be tested and evaluated thoroughly.

View the PDF document for more information.

Originally published by Renesas Electronics at www.renesas.com as "Communication with EEPROM Using the Renesas I2C Bus Module (RIIC)".





Comment on "Communicate with EEPROM using RIIC"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top