Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > RF/Microwave
 
 
RF/Microwave  

Embracing wireless BAN technology

Posted: 05 Dec 2011     Print Version  Bookmark and Share

Keywords:BAN  body area networks  health care 

In recent years, we've witnessed the emergence of body area network technology for remote patient monitoring. BAN development has been driven by pressure to reduce health care costs, and by an increased focus on prevention and early risk detection.

Market studies predict demand for BAN devices will reach an annual volume of 10 crore units by 2011, driven by wearable and implantable devices for use in patient monitoring, as well as for consumer health and fitness.

Given the ageing population in many regions, the monitoring aspect of health care represents an important piece of the puzzle, especially in countries where the availability of clinicians is the fundamental capacity limitation of the system. A system that continuously monitors the condition of elderly patients, sharing the information with remote care providers, can better cope with health care demand. This is particularly true when health care and elder care providers strive to allow senior citizens with chronic conditions to live independently for as long as possible.

BANs are highly localized wireless networks that can potentially support a variety of medical applications, from tracking vital signs to monitoring the functioning of implants and performing state-of-the-art endoscopic exams.

Traditional patient monitoring consists of physiological sensors connected between a patient's body and a dedicated signal processing unit located nearby through unwieldy wires. Those wires limit the patient's mobility and comfort, and some studies suggest they can be a source of in-hospital infections. Moreover, motion artifacts from the connected wires can negatively affect the measured results.

With the advent of low-power and low-cost wireless connectivity technologies, BANs can now be implemented and deployed using available complementary technologies. Figure 1 illustrates a typical wireless BAN.

Typical BAN

Figure 1: A typical body area network.

A network of sensors is placed on or close to the surface of the patient's body or implanted statically into tissue to enable the collection of specific physiological data. Such an arrangement allows for the continuous monitoring of a patient's health regardless of the person's location. Sensed signals can be those for electroencephalography (EEG), electrocardiography (EKG), electromyography (EMG), skin temperature, skin conductance and electrooculography (EOG).

Each of the sensors transmits collected information wirelessly to an external processing unit, located on the patient or at the patient's bedside. The processing unit can then use traditional data networks, such as Ethernet, Wi-Fi or GSM, to transmit all information in real-time to a doctor's device or a specific server. The sensors used in a BAN generally require accuracy for their physiological parameter of interest and a certain level of low-power signal processing as well as wireless capability.


1 • 2 • 3 Next Page Last Page



Comment on "Embracing wireless BAN technology"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top