Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Output voltage clamping with hot swap controller

Posted: 04 Oct 2011     Print Version  Bookmark and Share

Keywords:hot swap controller  current limiting  fault monitoring 

National Semiconductor's LM5069 hot swap controller provides inrush current limiting and fault monitoring. It also supplies a voltage to the load that is between defined limits. This feature prevents the load from receiving a voltage less than what it is rated for (which could result in erratic behaviour), and prevents it from receiving a voltage higher than what it is rated for, which could result in overheating and/or damage. The voltage limits to the load are set by the under-voltage lock out and over- voltage lock out thresholds, which are set with external resistors.

View the PDF document for more information.

Originally published by National Semiconductor Corp. at www.national.com as "Output Voltage Clamping Using the LM5069 Hot Swap Controller".





Comment on "Output voltage clamping with hot swa..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top