Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Memory/Storage
 
 
Memory/Storage  

HP innovates memristor technology

Posted: 18 May 2011     Print Version  Bookmark and Share

Keywords:memristor discovery  chemical element  oxide films 

Memristors are touted as the future "universal memory" device because they are as fast as DRAM, as small as flash, and as durable as read-only-memories, according to Hewlett Packard Co. As the fourth fundamental passive circuit element—after resistors, capacitors and inductors—memristors retain either a high or low resistance state by virtue of introducing or removing oxygen vacancies in oxide thin films.

Electrical engineers who express scepticism HP's memristors could switch as fast as DRAM and yet retain their memories millions of times longer than flash can now rest easy, according to their inventor, senior HP fellow Stanley Williams.

"What we have discovered is that an electric field and a current act together to enable a memory device that can both be switched very rapidly and hold its state indefinitely," says Williams. He adds that, "Not only does an applied voltage drive the migration of oxygen vacancies in the device, but at the same time there is a current that heats it up to about 300°C—just enough to turn the amorphous film into a crystalline film."

Memristor switching

Synchrotron x-rays probed the memristor in a 100nm region with concentrated oxygen vacancies (right, shown in blue) where the memristive switching occurs. Surrounding this region a newly developed structural phase (red) was also found to act like a thermometer revealing how hot the device becomes when read or written.

Using their favourite formulation—titanium oxide—HP recently used high-energy synchrotron x-rays to correlate the device's electrical characteristics with its atomic structure, chemistry, and temperature in three dimensions. The until now unforeseen conclusion was that a hot spot near the bottom electrode heats enough during switching to induce a crystallisation of the oxide. After driving out vacancies (for a 1) or introducing them (for a 0) in one-to-two nanometers thick region, the film cools in an annealing-like like process which leaves the film in a fixed crystalline state that should remain that way indefinitely.

"In testing, we have switched these devices over 30 billion times and counting, with no degradation in their ability to retain information," says Williams.

HP is currently working with Hynix Semiconductor Inc. to create commercial memories based on memristive technology.

- R. Colin Johnson
  EE Times





Comment on "HP innovates memristor technology"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top