Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Controls/MCUs
 
 
Controls/MCUs  

Power control using stop mode

Posted: 22 Mar 2011     Print Version  Bookmark and Share

Keywords:power control  Oscillation  MCUs 

This document by Renesas Electronics Corp. describes a setting method and application examples for power control using stop mode.

The application example described in this document applies to the following microcomputer (MCU) and parameters:
- MCU: R8C/35A Group
- Oscillation frequencies: 20MHz (XIN clock), 32.768kHz (XCIN clock)

This application note can be used with other R8C Family MCUs which have the same special function registers (SFRs) as the above group. Check the manual for any modifications to functions. Careful evaluation is recommended before using the program described in this application note.

View the PDF document for more information.





Comment on "Power control using stop mode"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top