Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Amplifiers/Converters
 
 
Amplifiers/Converters  

CS4525 2.0 layout reference and guidelines

Posted: 10 Dec 2009     Print Version  Bookmark and Share

Keywords:CS4525 2.0 layout  guideline layout  board design 

Class D amplifiers have several advantages over traditional Class A/B amplifiers. These include higher operating efficiencies, less thermal dissipation, and smaller form factors. However, in order to realise these advantages some changes are required relative to a traditional Class A/B amplifier board design. The board design changes are not difficult to implement, but are less familiar to most designers than techniques used for Class A/B amplifiers. Careful consideration to the circuit board layout should be taken up front in order to ensure a successful design.

This application note addresses the layout guidelines and provides layout references specific to the Cirrus Logic CS4525. The CRD4525-Q20 board is used as a layout example for a 2.0 speaker output configuration of the CS4525. This board should be used as a reference for all 2.0 speaker output configuration designs using the CS4525.

This application note is divided into three major sections. Section 1 is an overview of the high level board design subjects and how to get started. Section 2 and Section 3 focus on the component placement and board layout specific to a 2 channel, 2.0 output configuration, full-bridge board design, using the CRD4525-Q20 board as a reference. Component placement is discussed separately from layout and routing.

View the PDF document for more information.





Comment on "CS4525 2.0 layout reference and guid..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top