Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > RF/Microwave
 
 
RF/Microwave  

RF tester packs vector signal analyser, generator

Posted: 12 Nov 2009     Print Version  Bookmark and Share

Keywords:RF test  vector analyser generator  wireless test 

Aeroflex 7000 VAG

Aeroflex offers the 7000 series vector analyser generator (VAG), a single, fully-integrated RF parametric test system for RF test of wireless components and sub-systems. The 7000 series combines both vector signal generator and vector signal analysis in a single box, providing an integrated approach to measurements for complex wireless standards, including LTE.

The instrument features an intuitive touch-screen user interface that simplifies wireless testing. Its modular, software-defined functionality provides a flexible, "future-proof" platform for advanced wireless technologies, including LTE, GSM/GPRS/EDGE, 3G/HSPA, and WLAN.

Engineers involved in developing RF and base band products for use in wireless broadband components and cellular handsets will appreciate the increased productivity and potential for reduced time-to-market offered by the 7000 series VAG. These benefits will provide a particular advantage to engineers working on components and modules for LTE, because of the impending deadlines for network rollouts during the next few months.

The 7000 series VAG eliminates the need of a separate signal generator and analyser as they are both integrated together. This lowers capital expenditure and reduces test equipment inventory. The platform also supports two independent signal generators, allowing it to be used for receiver sensitivity and blocking measurements, MIMO simulation, and intermodulation testing of amplifiers, mixers, and other wireless components. The touch screen and intuitive user interface provide quick and easy access to the full range of complex measurements, speeding up test times for experienced users and also allowing novice users to quickly become proficient in performing measurements.

"The 7000 series offers the most complete and easy-to-use test system for RF test available today," said Bill Burrows, business development manager, Aeroflex. "It shares a common platform with our popular 7100 LTE tester, providing a seamless flow of user-generated routines from development through conformance and production testing. It is the only test platform on the market that can incorporate two independent signal generators and a vector network analyser in a single box."

The 7000 series has an operating frequency range of 1MHz to 6GHz, with a 90MHz bandwidth for both generation and analysis. This allows it to support multiple cellular and wireless broadband standards. Broader analysis bandwidths can also be addressed by intelligent "stitching" of the spectrum.

Both the built-in signal generator and the optional second generator have a typical phase noise level of 115dBc/Hz at 20kHz offset from a 2GHz carrier—equivalent to the performance of the best stand-alone signal generators. The vector signal generator includes a library of standard waveforms emulating all the popular cellular wireless standards, as well as an internal 2GB arbitrary waveform generator (AWG) with an intuitive waveform generation package that enables user-specific waveforms to be developed and played back. In addition, user-generated waveforms from Matlab and similar packages may be entered and stored on the instrument for use in the AWG.





Comment on "RF tester packs vector signal analys..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top