Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > T&M
 
 
T&M  

Network analyser cuts need for low-frequency add-on

Posted: 05 Nov 2009     Print Version  Bookmark and Share

Keywords:network analyser  digital communication  amplifier 

E5061B network analyser

Agilent Technologies released the E5061B network analyser that handles frequency range as low as 5Hz up to the RF range of 3GHz, eliminating the need for additional low-frequency-dedicated instruments.

Applications for the Agilent E5061B, part of the ENA series of network analysers, include general RF-network measurements, such as filters or amplifier tests, and low-frequency measurements necessary for loop-gain evaluation of DC/DC converters.

The E5061B's frequency coverage is suitable for power distribution networks measurements, which evaluate the quality of a DC power supply circuit. This type of evaluation is increasingly important, especially in high-speed digital communication equipment.

The analyser features S-parameter test port, 5Hz to 3GHz, with a wide dynamic range of 120dB at over 1MHz, 90dB at under 100Hz. The device also included gain-phase test port at 5Hz to 30MHz and switchable 1MΩ/50Ω input. In addition, the network analyser has DC bias source from 0 to 40Vdc, which can be added to AC test signal (for both S-parameter and gain-phase test port) or can be used as a sweepable DC source. The E5061B comes in a compact form factor with a 254mm depth, requiring less desktop space.

- EE Times Europe





Comment on "Network analyser cuts need for low-f..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top