Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Power/Alternative Energy
Power/Alternative Energy  

POL supplies suit solid-state drives

Posted: 13 Oct 2009     Print Version  Bookmark and Share

Keywords:point-of-load  POL supply  power management  solid-state drive 

PMR5000, PMR8000 POL supplies

Two point-of-load (POL) devices from Ericsson Power Modules offer easy paralleling making it possible for power servers and memory storage designers to access extremely flexible solutions for the next generation of low voltage supplies with very high DC currents approaching 100A.

The PMR5000 (50A) and PMR8000 (40A) are two additional products to Ericsson Power Modules' interoperable POLA product offering. Based on advanced technologies such as TurboTrans, the devices provide the highest level of performance when the load changes quickly from an inactive low-current state to a fully processing high-current state whilst requiring a rock solid, precise supply voltage to be maintained.

Factors driving the demand for this type of product include high efficiency, very fast transient and response times, and easy paralleling to reduce part numbers kept in inventory. Applications requiring these features combined with a high level of flexibility in power management when addressing microprocessor and memory storage, plus easy paralleling to double power on-demand include servers, data storage, high capacity memory cards, solid-state drives (SSDs), ATCA and a broad range of applications requiring high dynamic response point-of-load powering low-voltage high-current situations. These POLA devices are perfect for servers and high density memory cards aimed at replacing conventional hard disks.

"For the Point-of-Load Alliance (POLA), the addition of these two products responds to the high market interest for this business model of a group of power supplies companies sharing knowledge to support end-users with the most advanced products while securing second sources" said Patrick Le Fèvre, marketing and communication director at Ericsson Power Modules.

The PMR series' high output current of up to 50A with easy paralleling and current sharing make it very simple to interconnect two modules to power up to 100A applications while maintaining high efficiency and fast transient response time. Designed to meet ultrafast transient response time requirements of up to 300A/us, the PMR series is suitable for SSDs and high-capacity memory boards requiring high speed read/write capabilities.

Based on a highly optimised power-train and low power loss layout, the PMR series devices offer efficiency levels of up to 96 per cent. With an output voltage range of 0.7V to 3.6V for the PMR5000, and 3.0V to 5.25V for the PMR8000, this high flexibility reduces the number of products in inventory while reducing time to market for designers requiring a large variety of voltages per board. Additionally, with an input voltage range of 4.5V to 14V for the PMR5000, and 8V to 14V for the PMR8000, this versatile voltage range increases design flexibility by supporting operations with tightly regulated intermediate bus or loosely regulated 9.6V to 12V supplies.

Advanced technologies
The PMR5000 and PMR8000 include TurboTrans and SmartSync technologies. TurboTrans optimises the transient response of the regulator while simultaneously reducing the quantity of external output capacitors required to meet a target voltage deviation specification. Additionally, for a target output capacitor bank, TurboTrans can be used to significantly improve the regulators' transient response by reducing the peak voltage deviation. SmartSync allows for switching frequency synchronisation of multiple modules, thus simplifying EMI noise suppression tasks and reducing input capacitor RMS current requirements.

Protection includes output over-current protection (non-latching, auto reset), and adjustable under-voltage lockout. Other features include pre-bias start-up, autotrack sequencing, multi phase switch mode topology, and differential output voltage remote sense.

The PMR5000 and PMR8000 use double-sided, surface mount construction to provide a low profile and compact footprint. Package options include both through-hole and surface mount configurations that are Pb-free and RoHS compatible.

Part of Ericsson's third generation of POLA products, the PMR5000 and PMR8000 are based on innovative technologies reducing the amount of external capacitors while reducing output ripple and noise. Those technologies, that are already implemented in other POLA interoperable products (PMN and PMP), have proven benefits in applications and generate high market interest for such types of product.

As part of the very successful POLA programme, these products are fully interoperable with other members' equivalent products, guaranteeing customers access to second source products without having to fully re-qualify the product.

- Henri Arnold
EE Times Europe

Get related application notes and technical articles on Power Design India.

Comment on "POL supplies suit solid-state drives"
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top