Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Embedded

How to calibrate the MAX9979 pin electronics

Posted: 07 Oct 2009     Print Version  Bookmark and Share

Keywords:MAX9979 DAC  calibration register  gain offset error 

The MAX9979 is a highly linear, dual, 1.1Gbit/s pin electronics with integrated PMU and level-setting DACs. The device integrates a total of 28 16bit DACs (14 per channel). Each of these DACs feeds levels can be independently adjusted for gain and offset errors by using the device's calibration registers. These registers allow the MAX9979 levels to be calibrated to better than 5mV over the entire -1.5V to +6.5V operating range. This application note explains how this calibration can be accomplished.

View the PDF document for more information.

Comment on "How to calibrate the MAX9979 pin ele..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top