Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Memory/Storage
 
 
Memory/Storage  

Interface to ISP1705 USB host

Posted: 30 Jan 2009     Print Version  Bookmark and Share

Keywords:ISP1705  On-The-Go  USB host 

This document by ST-NXP Wireless describes how a link can interface to the ISP1705 for host, peripheral or On-The-Go (OTG) application. This document also includes the PCB design guidelines when integrating the transceiver into a system.

ISP1705 is a hi-speed USB host and peripheral transceiver. It supports high-speed (480Mbps), full-speed (12Mbps) and low-speed (1.5Mbps) data rates. Its internal architecture of is ULPI-compliant interface operating at 60 MHz. It interfaces to USB ASIC, FPGA or any system chip set through an 8-pin or 12-pin ULPI interface. All static UTMI signals are accessed through the ULPI compliant register set. The ULPI interface includes a 4-bit or 8-bit data bus, three control signals and a 60 MHz clock signal for synchronisation. The bidirectional data bus with control signals can synchronously transmit and receive USB packets and access register data.

View the PDF document for more information.





Comment on "Interface to ISP1705 USB host"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top