Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > RF/Microwave

Wireless comms in factory automation

Posted: 21 Jan 2009     Print Version  Bookmark and Share

Keywords:wireless communication  factory automation  wireless signals  industrial networks 

A recent report from IMS Research on wireless communications in factory automation shows that obstacles not found in the office environment continue to hinder adoption.

In 2007, the estimated worldwide market for wireless products in factory automation was only 5 lakh units. This total is comprised of products with built-in wireless functionality, such as sensors, operator terminals, PLCs, remote IO, drives and wireless access points.

Currently, the biggest obstacle to adopting wireless communications for machine builders and end users alike is reliability. The presence of heavy machinery that can interrupt wireless signals, together with the increasing importance of gathering dependable, detailed machine data has convinced most, for now at least, that wired solutions are best.

However, an increasing number of companies are now beginning to experiment with wireless products that have been specifically designed and ruggedised for use in a factory environment. They want to improve, having chosen the correct infrastructure and wireless technology, the performance and functionality of their industrial networks.

The falling cost of wireless-enabled products is a further incentive for companies to convert from a wired network, or to use both types of network alongside each other. This is especially attractive in the current economic climate, since the initial outlay to install a wireless network is lower than that of a wired network. For example, a significant cost saving is achievable in an application such as a waste water treatment plant where pumps can be located several hundred metres from the control room.

The adoption of a wireless network for applications such as condition monitoring also saves component costs, such as slip rings, which were previously required to monitor rotating components. With a wireless sensor, a user can now more closely monitor applications incorporating rotating parts, without incurring costs that may have previously deterred any kind of data acquisition.

Wireless communication, through battery-powered wireless sensors, can also be used for monitoring in plant areas previously unsuited to wired sensors.

It is therefore expected that, between 2007 and 2013, worldwide shipments of wireless communication systems in factory automation will grow at an average of 40% each year. In part, this growth will be driven by automation component suppliers, who continue to see wireless technology as the next big step to increasing plant efficiency and assuring the safety of their customers.

Machine builders and end users now need to select those applications best suited to a wireless network, to reap the benefits that it can offer.

Comment on "Wireless comms in factory automation"
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top