Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > T&M
 
 
T&M  

Data acquisition family gets new members

Posted: 18 Dec 2008     Print Version  Bookmark and Share

Keywords:data acquisition  power measurement module  acquisition system  strain gage modules 

NI 9225

National Instruments has expanded its C Series data acquisition line with the NI 9225 300 V power measurement module as well as the NI 9235 and NI 9236 eight-channel strain gage measurement modules.

These modules are supported on NI C Series-based devices including the NI CompactDAQ plug-and-play data acquisition system, NI CompactRIO rugged control and acquisition system and NI Single-Board RIO embedded design devices. These three new modules expand the C Series I/O platform to more than 40 modules and add power quality testing capabilities.

Using the NI 9225 300 V measurement module, engineers now can make high-voltage measurements to test battery stacks or monitor power quality events. The analogue input module is designed for high-voltage waveform measurements, such as line-to-neutral as well as line-to-line measurements of 110 V power grids and line-to-neutral measurements of 240 V power grids. The NI 9225 has three simultaneously sampled channels at 50 kS/s for accurate three-phase power metering and power quality measurements such as flicker, harmonics and power factor.

The NI 9235 and NI 9236 strain gage modules deliver eight channels of simultaneously sampled 24-bit quarter-bridge strain gage measurements. The channel density and fast sampling rate of 10 kS/s per channel make these modules well-suited for structural health monitoring, dynamic mechanical test and impact test.

Engineers can synchronise up to eight modules in an NI CompactDAQ or CompactRIO chassis to create a 64-channel strain measurement system, and synchronise multiple chassis to the same clock or GPS signal for even higher-channel-count or distributed systems.

The intuitive NI LabVIEW graphical programming environment makes it easy for engineers to communicate to and read data from C Series I/O modules. Because of the enhanced software integration with I/O modules, engineers can use the LabVIEW programming environment to develop and deploy code across multiple C Series platforms to fit their specific project needs.

They can use the same LabVIEW environment to create a USB data logger with NI CompactDAQ, an industrial control or structural health monitoring system with CompactRIO or an embedded system with NI Single-Board RIO.

The NI 9225, NI 9235 and NI 9236 are priced at about Rs.75,004 ($1,499) each.





Comment on "Data acquisition family gets new mem..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top