Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Amplifiers/Converters

Big players enter MEMS mic arena

Posted: 03 Nov 2008     Print Version  Bookmark and Share

Keywords:MEMS microphones  two-chip solution  analogue MEMS mic 

MEMS microphones were once the darlings of start-ups, but no more. Analog Devices Inc. has announced a major thrust into the fledgling MEMS microphone market, predicted by Yole Développement to sell 80 crore units by 2010. ADI's entry into this potentially high-volume market follows the entry last year of Infineon Technologies AG. Neither company has yet reported shipping production units.

"From a market perspective, Analog Devices' entry, following Infineon's entry last year, gives very high-volume customers like cell phone makers two sources of MEMS microphones from companies that are used to supplying these kinds of high volumes," said Marlene Bourne, founder of Bourne Research. "After all, the electret microphones that MEMS mics will replace in mobile phones are being delivered in the billions of units per year—those buyers will have an innate comfort level in dealing with companies like Analog Devices and Infineon."

Two years ago, start-up Akustica Inc. announced the world's first MEMS microphone. The company took an innovative approach using a single CMOS chip that surrounds the mechanical microphone diaphragm with its supporting electronic circuitry—including an ADC—enabling Akustica's digital microphone to eliminate analogue noise sources and leverage CMOS economies of scale, which reduce die costs as design rules shrink.

Getting on the bandwagon
A few months later, hearing-aid specialists Knowles Electronics Inc. announced a two-chip analogue MEMS microphone—one for the mechanical diaphragm wire-bonded to a second ASIC in the same package. Shortly thereafter, another start-up, Sonion MEMS A/S (now part of Technitrol Inc.), announced a two-chip MEMS microphone.

So far, Akustica and Knowles are the only MEMS microphone makers reporting volume shipments. Akustica has been shipping its digital MEMS microphone to laptop makers, whose circuitry was already igital. Knowles has sold its MEMS microphone into applications that required an analogue MEMS mic. Since then Akustica has announced a single-chip analogue MEMS mic that downsised its die to just 1mm2 and Knowles announced a two-chip digital MEMS mic that includes an ADC on its ASIC. In hopes of luring high-volume cell phone makers into switching from electrets to MEMS mics with the assurance of two sources, Knowles and Akustica have announced a cross-licensing agreement.

"Analog Devices' entry to the market will put significant pressure on Knowles and Akustica," said Bourne. "Analog Devices and Infineon are sure to snap away significant market share as they will probably become the preferred first and second sources, with the smaller start-ups left to focus on niche and mid-level applications."

Despite the tough talk from analysts about a small company's inability to manufacture in the hundreds-of-millions unit quantities that market research companies predict to be coming for MEMS microphones in he next few years, Akustica, for one, remains gung ho.

"At the end of the day, the market is so big—with billions of units up for grabs in the next five years—there needs to be more competitors out there to meet all that demand," said Davin Yuknis, VP of marketing and product management at Akustica. "And as far as we know we are still the only supplier with a single-chip solution, so we plan to take the high road, and not just sell commodities."

The MEMS microphone's particle filter (inset) covers its diaphragm, fabricated from a silicon slab with thousands of 6µm wide x 10µm deep holes.

ADI's entry into the MEMS microphone market includes both analogue and digital versions, using a two-chip solution housed in the same package. Common to the two versions is the MEMS microphone chip, but different ASICs are wire-bonded to the MEMS chips in the same package so OEMs can choose either analogue or digital outputs.

A unique aspect of ADI's design is a particle filter constructed by perforating a silicon cover over the microphone's diaphragm. The particle filter uses deep holes just 6µm wide but 10µm deep. The deep holes in this perforated cover are exceptionally effective at keeping dust and other contaminants from reaching the delicate MEMS diaphragm, according to ADI.

"From an engineering perspective, the most unique aspect of Analog Devices' MEMS microphone is this filter that they have put over the microphone's diaphragm to keep particles from effecting its performance," said Bourne.

ADI also claims that by delaying its entry into the market by two years, compared with Akustica and Knowles, it has had time to craft a MEMS microphone with exceptional specifications. ADI claims a wide frequency response, low noise level and high immunity to the mechanical and sound-pressure shocks often experienced by mobile phones and similar handheld consumer devices.

"We have the world's highest SNR in the industry [61db a-weighted], the highest immunity to mechanical and sound-pressure shocks [20kG and 160dB, respectively] and the highest power-supply noise rejection [50dB and 80dB for analogue and digital versions, respectively]," said Alex Khenkin, senior acoustics engineer at ADI.

Because the particle filter protects the MEMS membrane, the entire inside of the chip package serves as the microphone's back-volume, rather than just using the small volume behind the MEMS chip itself, as in esigns without a particle filter. The larger back-volume enables a flat frequency response from 100Hz to 15,000Hz without the typical midrange peak, according to the company.

- R. Colin Johnson
EE Times

Comment on "Big players enter MEMS mic arena"
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top