Global Sources
EE Times-India
Stay in touch with EE Times India
EE Times-India > Networks

PXI switches employ solid-state relay

Posted: 27 Aug 2008     Print Version  Bookmark and Share

Keywords:high current  switching solutions  solid-state  relay solutions 

solid-state relay solutions

Pickering Interfaces has added a family of high power capacity solid-state relay solutions to its range of PXI high current switches. The range contains eight modules configured as Fault Insertion, SPST Relay, Multiplexer and Matrix switches at 10A/200V and 30A/40V.

The 40-192 is a six-channel fault insertion switch with two fault busses capable of hot switching signals up to 10A and 200V. The 40-191 uses the same architecture but is capable of switching signals of 30A, 40V and handling surge currents in excess of 120A with no lifetime degradation. Each module is capable of simulating the most common faults found in a system-open circuits and shorts circuits to one of two fault connections. The fast switching speeds ensure the modules can be used to simulate transient fault conditions, claims Pickering.

The 40-182 and 40-183 are six-channel SPST solid-state switches with 10A, 200V and 30A, 40V ratings, respectively.

The 40-666 and 40-667 are solid-state multiplexers available in dual three-channel or single six- channel configurations with10A, 200V and 30A, 40V ratings, respectively.

The 40-553 and 40-554 are 6x2 solid state matrices with 10A, 200V and 30A, 40V ratings, respectively.

All modules can handle AC or DC signals up to the rated voltage and use high capacity male D Type user connectors. The modules can be fitted to any 3U PXI chassis or installed in a Pickering Interfaces LXI Modular chassis if ethernet control is preferred. Each module occupies two PXI slots and is supplied with software drivers for common programming environments, including RT operating systems.

Designed for fast switching operation and high hot switching capacity, the modules offer a capability that is hard to achieve with a mechanical relay, particularly in the PXI form factor. The fast transition times ensure the modules can sustain frequent hot switching without degradation and each switch can sustain high inrush currents making them ideal for switching power supplies with capacitive loads, says Pickering.

With high tolerance to transient conditions and conservative ratings, the modules are designed for a long and service free life in the most demanding high current applications.

Comment on "PXI switches employ solid-state rela..."
*  You can enter [0] more charecters.
*Verify code:


Visit Asia Webinars to learn about the latest in technology and get practical design tips.


Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

Back to Top