Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > T&M
 
 
T&M  

DDR BGA probes for scopes, logic analyzers debut

Posted: 30 Jan 2008     Print Version  Bookmark and Share

Keywords:DDR2 and DDR3 BGA probes  oscilloscopes  logic analyzers 

DDR BGA probe

Agilent Technologies Inc. claims the industry's first DDR2 and DDR3 BGA probes for oscilloscopes and logic analysers.

DRAM data rates have increased significantly over the past few years. Hence, the signals are now operating at a faster speed in a smaller package, which requires a more reliable tool for validating the memory systems. Agilent's DDR BGA probe provides direct access to the balls of the DRAM with low loading and minimal impact to signal integrity. The probes are used with the oscilloscopes and logic analysers to perform PHY and functional test.

The Agilent DDR2 and DDR3 BGA probes provide signal access points to the clock, strobe, data, address and command signals of the DDR3 DRAM for true compliance testing with an oscilloscope. The logic analyser provides timing and protocol view of the DRAM activities. The DDR2 BGA probe enables simultaneous access to the oscilloscope and to the logic analyser's full compliance and protocol validation.

"Engineers need to access memory buses with measurement tools that provide high signal-integrity performance and protocol validation," said Sigi Gross, vice president and general manager of Agilent's digital test division. "Both the DDR2 and DDR3 BGA probe adapters meet their needs. We are ready with the tools—including the DDR3 test application we launched recently—that will help engineers validate their designs quickly and easily."

The DDR2 BGA probe provides probing of x8 and x16 DRAM packages. Model numbers W2631A and W2632A, when combined with Agilent's E5384A and E5826A logic analyser adapters, support command and data probing for x16 packages; model numbers W2633A and W2634A provide access to command and data buses for x8 packages. When used with high-bandwidth solder-in InfiniiMax probes, all four DDR2 BGA probe variants allow probing with the oscilloscopes.

The DDR3 BGA probe supports different packages. The W2635A x8 BGA probe provides support for x4 and x8 DRAM package. The W2636A x16 BGA probe adapter provides support for x16 DRAM package. Each comes in two different widths (10mm and 11mm) to satisfy the different spacing requirements between DRAM chips.

Pricing depends on device configuration options and ranges from Rs.39,478.39 ($1,000) to Rs.78,917.30 ($1,999).




Comment on "DDR BGA probes for scopes, logic ana..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top