Global Sources
EE Times-India
 
EE Times-India > EDA/IP
 
 
EDA/IP  

Signal creation software targets mobile WiMAX, WiBro

Posted: 30 Dec 2005     Print Version  Bookmark and Share

Keywords:Agilent Technologies  signal creation software  mobile WiMAX  Worldwide Interoperability for Microwave Access  WiBro 

Agilent Technologies has a first release of signal creation software for mobile Worldwide Interoperability for Microwave Access (WiMAX) and wireless broadband (WiBro) applications. It is for the company's E4438C ESG microwave vector signal generator.

WiMAX is intended to make point-to-multi-point broadband network access widely available without the expense and distance limitations associated with wired options. WiBro is a broadband wireless Internet service for South Korean systems based on the IEEE-802.16e standard.

Compliant waveforms
The N7615A Signal Studio for 802.16 Orthogonal Frequency Division Multiplexing (OFDMA) software creates waveforms that comply with the Wireless MAN-OFDMA physical layer in the IEEE-802.16-2004, 802.16-2004/Cor1/D2 or D3, and IEEE-802.16e/D9 standards. Its ability to create down-link or up-link sub-frames in TDD or FDD makes it suitable for testing base station and subscriber station equipment.

If you're working with baseband receiver test and system verification, the N7615A software lets you configure waveforms for both component and receiver design verification and testing. The software's intuitive graphical user interface (GUI) gives you access to physical and basic MAC layer parameters, including bandwidth, cyclic prefix ratio (G), sampling factor (n), fast fourier transform (FFT) size (512, 1024 or 2048) and frame length.

Frame set-up parameters
Using the software's frame set-up parameters, you can generate high peak-to-average power ratio down-link or up-link signals that can be used to test transmission chain components such as amplifiers. Generating signals for receiver test is done with automatic generation of correct FCH, DL-MAP and UL-MAP data.

The N7615A Signal Studio for 802.16 OFDMA can create up to 16 incrementally numbered frames/ waveform, and can configure frames for down-link, up-link, or both. The software's frame configuration provides for zone and burst allocations, too. Supported zone types include DL-PUSC, DL-FUSC, UL-PUSC and UL-OPUSC. The software can control signal generator functions remotely through the GUI.

Price and availability
The software is available now at a starting price of Rs.3,43,875 ($7,500). A free 14-day trial license of the software can be downloaded from Agilent's website.

- Alex Mendelsohn
eeProductCenter




Comment on "Signal creation software targets mob..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top