Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Networks
 
 
Networks  

Timing devices target smart grid, industrial automation apps

Posted: 07 May 2014     Print Version  Bookmark and Share

Keywords:IDT  timing IC  Ethernet  smart grid  industrial automation 

Integrated Device Technology Inc. (IDT) has unleashed what it boasts as the industry's first Ethernet and IEEE 1588 timing devices geared to meet the performance, functionality and cost targets of smart grid and industrial automation applications. According to the company, the low-jitter timing products boost the accuracy and reliability of IEEE 1588 time transport and offer important flexibility with an integrated Ethernet digital PLL (DPLL) and digitally-controlled oscillator (DCO) in a single chip.

8V89316, 8V89317

The 8V89316 and 8V89317 are low-jitter Ethernet PLLs used to frequency synchronise switches and routers via the Ethernet physical layer to improve the reliability and time accuracy of IEEE 1588-based transparent clocks, boundary clocks and ordinary clocks. The 8V89316 generates clocks suitable for QSGMII (Quad Serial Gigabit Media Independent Interface) and 1GbE interfaces, while the ultra-low-jitter 8V89317 is suitable for 10GbE interfaces and adds the ability to lock to 1PPS GPS clocks. Both devices include DCOs for increased flexibility, allowing them to lock to an incoming Ethernet clock or synthesise their own IEEE 1588-based clocks that other devices in the system can use as a frequency reference.

The 8V89317 can lock to a 1PPS frequency reference from a GPS receiver, allowing use as part of a local network master clock without the need for wire- or fibre-based access to a synchronisation source. GPS timing improves flexibility of the physical location of a clock and reduces installation costs for 'timing islands' by eliminating the need to extend a timing network to every location.

The 8V89316 achieves phase jitter below 650fs RMS over the 10kHz to 20MHz integration range, making it appropriate for 1G Ethernet PHYs and QSGMII. The 8V89317 phase jitter is below 300fs RMS over the 10kHz to 20MHz integration range, capable of meeting the most stringent 10G or 40G Ethernet PHY jitter performance requirements.

The IDT 8V89316 and 8V89317 are sampling to qualified customers and are encapsulated in a 196-ball 15 x 15mm CABGA package. The IDT 8V89316 and 8V89317 are priced at $9.46 and $18.30 each for volumes of 1,000 units, respectively.





Comment on "Timing devices target smart grid, in..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top