Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Aluminium studs boost PV cell efficiency

Posted: 22 Oct 2013     Print Version  Bookmark and Share

Keywords:Imperial College London  aluminium stud  solar cell efficiency 

A team of researchers from Imperial College London has demonstrated that the efficiency of all solar panel designs could be enhanced by up to 22 per cent by covering their surface with aluminium studs that bend and trap light inside the absorbing layer.

Presently, most solar cells used in homes and industry are made using thick layers of material to absorb sunlight, but have been limited in the past by relatively high costs. Many new, lower cost designs are limited as their layer of light-absorbing material is too thin to extract enough energy.

At the microscopic level, the studs make the surface of the solar panels look similar to the interlocking building bricks played with by children across the world.

"In recent years both the efficiency and cost of commercial solar panels have improved but they remain expensive compared to fossil fuels. As the absorbing material alone can make up half the cost of a solar panel our aim has been to reduce to a minimum the amount that is needed," said lead author Nicholas Hylton from the department of physics at Imperial College London.

"The success of our technology, in combination with modern anti-reflection coatings, will take us a long way down the path towards highly efficient and thin solar cells that could be available at a competitive price."

The Imperial team attached rows of aluminium cylinders just 100nm across to the top of the solar panel, where they interact with passing light, causing individual light rays to change course. More energy is extracted from the light as the rays become effectively trapped inside the solar panel and travel for longer distances through its absorbing layer.

In the past scientists have tried to achieve the light bending effect using silver and gold studs because those materials are known to strongly interact with light, however these precious metals actually reduce the efficiency as they absorb some of the light before it enters the solar panel.

"The key to understanding these new results is in the way the internal structures of these metals interact with light. Gold and silver both have a strong effect on passing light rays, which can penetrate into the tiny studs and be absorbed, whereas aluminium has a different interaction and merely bends and scatters light as it travels past them into the solar cells."

An additional advantage to this solution is that aluminium is cheaper and far more abundant than silver and gold.

The future success of this technology opens up the possibility of making flexible solar panels that could be applied to any flat or curved surface, which could be used to power everything from domestic appliances to portable electronics such as laptops.





Comment on "Aluminium studs boost PV cell effici..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top