Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > FPGAs/PLDs
 
 
FPGAs/PLDs  

Xilinx Zynq-7000 FPGA achieves 1GHz

Posted: 09 Aug 2012     Print Version  Bookmark and Share

Keywords:FPGA  SoC  28nm 

Xilinx says that its Zynq-7000 programmable SoC FPGA family has achieved peak processing performance of 1GHz and is also offering smaller packaging for higher system performance.

 Zynq-7000

The new 1GHz performance benchmark, a 25 per cent increase over initial specifications for the two largest Zynq-7000 devices, means the family can meet the performance requirements of even more applications than previously anticipated, especially for systems involving heavy-duty image or signal processing where customers need high-end processing capabilities in a single chip.

"The combination of the processor sub-system running at 1GHz with the acceleration capability that the tightly coupled programmable logic offers, puts the Zynq-7000 All Programmable SoC on par, and often ahead, of competing dual core solutions with higher processor frequencies, and in many cases at lower power," said Vidya Rajagopalan, Xilinx's vice president of processing solutions. "A significant factor behind our ability to take the Zynq-7000 family to 1GHz is Xilinx's choice of TSMC's 28nm HPL process, which we are using for our entire 28nm generation to bring the value of low-power with high-performance to customers."

Test equipment maker Rohde & Schwarz is an early access customer using the first Zynq-7045 for its products. "Using Zynq for our measurement devices gives us an extremely compact physical solution as well as an extremely compact system because software and hardware are closer together than ever before," said Matthias Goetz, hardware project leader at Rohde & Schwarz. "We especially appreciate the great bandwidth performance between the FPGA and industry standard processing sub-system because it accelerates our processing and system development and it allows us to easily move functions from processor to programmable logic when and where needed."

The Zynq-7045 device is the largest member of Xilinx's family of All Programmable SoCs with more than 5 million equivalent ASIC gates (350k logic cells), sixteen 12.5Gb/s serial transceivers and 1334 GMACS of peak DSP performance. The Zynq-7045 devices pushes programmable systems integration a step further by providing a hard PCIe Gen2 x8 block, (PCIe x8 Gen3 can be implemented using a soft core in the programmable logic), with high performance SelectIO technology supporting up to 1866Mb/s for additional DDR3 memory interfaces and 1.6Gb/s for LVDS interfaces in DDR mode.

The added capability of operating the dual ARM Cortex A9 processors at 1GHz provides headroom to run video processing GUI while simultaneously running several audio codecs and other real time processing functions. The 12.5GHz transceivers enable eight SDI video streams while also supporting 10G Ethernet for video over IP.

Xilinx is also announcing the addition of the CLG225 package, a small, 13 x 13mm package for Zynq-7010 devices, supporting programmable system integration for more space constrained applications, such as industrial motor control and imaging, camera-based driver assistance systems, portable medical imaging equipment and a variety of consumer products.

Zynq-7045 devices are currently shipping to select Early Access customers. Broader availability will begin next quarter. Zynq-7020 devices have been shipping to customers since December 2011.





Comment on "Xilinx Zynq-7000 FPGA achieves 1GHz"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top