Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

Linear's ideal diode controller replaces Schottky diodes

Posted: 05 Jun 2012     Print Version  Bookmark and Share

Keywords:ideal diode  controller  MOSFET 

Linear Technology Corp. debuts the LTC4359 high voltage ideal diode controller that operates over a wide 4V to 80V supply range and withstands input voltages between -40V to 100V without damage.

 LTC4359

The LTC4359 is said to offer a simple low loss replacement to Schottky diodes, along with key features targeted for automotive, avionics as well as solar applications. Operating current is a low 150µA, and a shutdown control input enables the LTC4359 to be in a low current shutdown mode, drawing just 13µA.

In addition, the LTC4359 is guaranteed for operation across the -40°C to 125°C ambient temperature range. These features enable the LTC4359 to protect loads in harsh automotive environments such as during load dump, cold crank, two-battery jumps, and reverse battery connections. When combined with the LT4363 high voltage Surge Stopper, the LTC4359 provides solid front-end protection from over-voltage, over-current and reverse battery. Solar systems also benefit from the low operating current of this device, where the LTC4359 can be used to provide a low loss path that isolates the solar panel from the load.

The LTC4359 controls an external N-channel MOSFET to perform the function of a low forward voltage diode. This provides a lower loss path compared to Schottky diodes and in high power applications provides a more efficient solution and preserves precious board space by reducing the need for heat sinking. In addition, control of back-to-back MOSFETs is available to prevent current flowing from input to output during shutdown. The LTC4359 controls the forward voltage drop across the MOSFET to ensure smooth current delivery without oscillation, even under light loads. If a power source fails or is shorted, a fast <1µs turn-off minimises reverse current transients.

The LTC4359 single ideal diode controller can also be used in applications where multiple power supplies are paralleled to provide redundancy. In N+1 redundant systems, an additional supply is added to safeguard the system in the event one of the supplies fail. ORing the supplies together allow disconnection from the power bus for an input failure or hard short. Additionally, the LTC4359 can be used with a reservoir capacitance to hold up the supply for a period of time after a loss of input power. This enables continuing system operation without resetting or rebooting due to brief interruptions of input power.

The LTC4359 joins a family of ideal diode controllers that includes the single high voltage LTC4357 ideal diode controller, LTC4355 positive diode-OR, LTC4354 negative diode-OR controllers, and the 0V-18V LTC4352 single ideal diode controller. The ideal diode controller portfolio complements Linear's extensive portfolio of surge stoppers and Hot Swap controllers, such as the high voltage LTC4260 Hot Swap controller with an internal ADC for extensive system monitoring.

Specified over the commercial, industrial and automotive temperature ranges, the LTC4359 is offered in 2mm x 3mm 6-lead DFN and 8-lead MSOP packages. Available today, pricing begins at Rs.109.95 ($2.10) each in 1,000 piece quantities. Demo boards and free samples are available online or via local Linear Technology sales office.





Comment on "Linear's ideal diode controller repl..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top