Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > T&M
 
 
T&M  

Synchronising two arbitrary waveform generators

Posted: 19 Jan 2012     Print Version  Bookmark and Share

Keywords:synchronisation  Arbitrary Waveform Generators  connectors 

For applications that call for more than 2 channels, a built-in synchronisation feature allows for synchronising two 81180A Arbitrary Waveform Generators to create a fully synchronised 4-channel system. The synchronisation procedure is described in this document.

Two instruments can be synchronised only when cross-connected with a designated synchronisation cable. To connect the cable, turn the power off on both instruments. Locate the rear-panel Master/Slave connector and attach each side of the cable to these connectors. Note that the connectors do not lock into position without screwing in the bolts on each side. Use a flat tip screwdriver to latch the cables into their receptacle housing, making sure the connectors are straight and firmly locked into place. Once the cable is connected, the instruments can be powered on again.

View the PDF document for more information.

Originally published by Agilent Technologies Inc. at www.agilent.com as "Multi-Instrument Synchronisation with the 81180A".





Comment on "Synchronising two arbitrary waveform..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top