Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Processors/DSPs
 
 
Processors/DSPs  

Learn about MSC815x boot process

Posted: 27 Sep 2011     Print Version  Bookmark and Share

Keywords:boot process  serial RapidIO  DSP 

Here's a reference for the MSC815x boot process through the use of serial RapidIO (SRIO) transactions and the SmartDSP OS. It includes a booting example that serves as a learning exercise in setting up the MSC815x ATMUs, configuring the MSC8156AMC card, and booting a multi-device serial RapidIO system.

Although typically the MSC815x DSP is booted from a non-DSP host, such as a device built on Power Architecture technology (for example, the P4080), this application note uses an MCS8156ADS as a boot host and the multi-device MSC8156AMC as the boot target.

While this document demonstrates a host booting the master DSP over serial RapidIO, it also provides the full configuration to put all three AMC DSPs into serial RapidIO boot mode.

View the PDF document for more information.

Originally published by Freescale Semiconductor Inc. at www.freescale.com as "MSC815x Serial RapidIO Boot".





Comment on "Learn about MSC815x boot process"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top