Global Sources
EE Times-India
 
EE Times-India > EDA/IP
 
 
EDA/IP  

Controlling M45PE SPI serial flash memory using software

Posted: 14 Sep 2011     Print Version  Bookmark and Share

Keywords:sample code  Serial Flash memory  MCU 

In this application note, the method for controlling Micron Technology Inc. M45PE series SPI Serial Flash memory is discussed. It also tackles how to use the sample code for the products.

This sample code lies in a higher-level layer of the software for controlling a Serial Flash memory as a slave device. Also available for your reference is the separate software (clock synchronous single-master control software) which lies in the lower-level layer of the software for controlling the SPI mode of the individual MCUs serving as master devices. The target devices of this document are the following:
- Serial Flash memory: Micron Technology Inc. M45PE series SPI Serial Flash memory
- MCU used for checking the operation of the sample code: RX610 group

View the PDF document for more information.

Originally published by Renesas Electronics Corp. at www.renesas.com as "Micron Technology M45PE Series Serial Flash memory Control Software".





Comment on "Controlling M45PE SPI serial flash m..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top