Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Processors/DSPs
 
 
Processors/DSPs  

Using user program mode

Posted: 04 May 2011     Print Version  Bookmark and Share

Keywords:Serial Communication Interface  FIFO 

This application note by Renesas Electronics describes an example to run the flash memory reprogramming program in SH7216 microcomputers user program mode. An external device which is connected to the SH7216 stores the data to write to the flash memory, and communicates with the flash memory using the Serial Communication Interface with FIFO.

The flash memory reprogramming program described in this application note is stored on the SH7216 user MAT. The simple flash API for SH2 and SH2A (Standard API) provided by the Renesas Electronics is used to reprogram the flash memory.

View the PDF document for more information.





Comment on "Using user program mode"
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top