Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > T&M
 
 
T&M  

OTA test methods for evaluating the performance of MIMO user equipment

Posted: 24 Feb 2011     Print Version  Bookmark and Share

Keywords:over-the-air  multiple input multiple output  N5106A PXB  probe antennas 

Several over-the-air (OTA) test methods have been proposed to characterize the radiated performance of multiple input multiple output (MIMO) devices. Knowing that antenna gain and spatial correlation are important factors to system performance, it has become necessary to include OTA testing of MIMO antenna performance. This paper will discuss three predominant OTA test methods including the two-stage OTA method, the multiple test probe OTA method and the reverberation chamber method. In some test configurations, the probe antennas are connected to a wireless channel emulator, such as the Agilent N5106A PXB, to emulate real-world multipath environments. In addition, this paper will discuss two types of MIMO channel models, the correlation-based and geometry-based models, and show how antenna and spatial characteristics at the MIMO transmitter and receiver can be separated into independent terms. Separating antenna gains and spatial characteristics allow the practical implementation of accurate OTA measurement systems using commercially available test instrumentation. This paper will also show measurements of spatial correlation and system capacity taken from commercial MIMO devices, and comparisons will be made using several OTA methods.

View the PDF document for more information.





Comment on "OTA test methods for evaluating the ..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top