Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Processors/DSPs
 
 
Processors/DSPs  

In-circuit programming for the MAX16065-MAX16068 and MAX16070/MAX16071 flash-programmable system managers

Posted: 16 Aug 2010     Print Version  Bookmark and Share

Keywords:in-circuit programming  MAX16065-MAX16068  JTAG bus 

The MAX16065-MAX16068 and MAX16070/MAX16071 microprocessor supervisors can be programmed after they are soldered to the application circuit board. This means that only the unprogrammed device needs to be stocked, and that the latest version of the configuration information can be written to the device during manufacturing test. A few simple measures ensure that the application circuit allows the programming hardware to share the SMBus or JTAG bus lines and provides power for the device during programming. This application note provides the programming algorithm for both the SMBus and the JTAG buses.

View the PDF document for more information.





Comment on "In-circuit programming for the MAX16..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top