Global Sources
EE Times-India
Stay in touch with EE Times India
 
EE Times-India > Power/Alternative Energy
 
 
Power/Alternative Energy  

1.5A LED flash driver packs I²C-compatible interface

Posted: 26 Jul 2010     Print Version  Bookmark and Share

Keywords:LED driver  power conversion 

Analog Devices Inc. (ADI) enhanced its power management product portfolio with a 1.5A white LED flash driver that offers improved picture and video quality in low ambient light environments.

The ADP1650 features a programmable I2C-compatible interface, programmable torch and flash currents for one LED up to 1500mA, two independent TxMASK inputs and a 4-bit ADC. The inductive-based LED flash driver also provides high efficiency at 85 per cent at the typical battery voltage (90 per cent peak), which reduces high levels of input battery current during flash and limits battery current drain in torch mode. The ADP1650 measures 2mm × 1.5mm in a 12-ball WLCSP package and reduces PCB requirements.

The ADP1650 enables a complete high power flash design in less than 17mm2 by integrating a programmable 1.5MHz or 3.0MHz synchronous inductive boost converter, a tiny, 1mm high, low-cost, 1-µH power inductor, and an 0603 case-size input and output capacitor. The new LED driver operates efficiently over the entire battery voltage range by maximising the input-power-to-LED-power conversion and minimising battery current draw during flash events. The ADP1650 connects easily to the latest image sensors and image processors and is designed to operate using the limited battery current available for flash.

The ADP1650 is priced at Rs.44.36 ($0.95) each.

- Ismini Scouras
EE Times





Comment on "1.5A LED flash driver packs I²C-com..."
Comments:  
*  You can enter [0] more charecters.
*Verify code:
 
 
Webinars

Seminars

Visit Asia Webinars to learn about the latest in technology and get practical design tips.

 

Go to top             Connect on Facebook      Follow us on Twitter      Follow us on Orkut

 
Back to Top